CiscoCCNP：BCMSN

ciscoCCNP：BCMSN
 

CHEET SHEETS: BCMSN (640-504)
COPYRIGHT KEEN INTERACTIVE 2000
Last Update: 8/2/00

1. Which of the following are true of unicast IP?
a. IT consumes resources in a network in proportion to the number of hosts served
b. It can be eITher TCP or UDP
c. IT uses a class D address
d. A server transmITting unicast IP does not need to 慿now?the recipIEnt抯 address

2. Which of the following are true of remote services?
a. They are centralized and therefore rEQuire transport across the backbone to reach the user
b. They are common to all users
c. They are on a different VLAN than the user
d. They are typically connected to the user via a layer 2 swITching path

3. Which of the following is a form of out-of-band management?
a. Web-based management
b. Console port
c. LAT
d. TELNET

4. Spanning tree proTOCols puts a port in one of 5 states. Which of the following is true of the forwarding state?
a. No frames are forwarded. BPDU抯 are heard.
b. No frames are forwarded. No BPDU抯 are heard.
c. No frames are forwarded. Learning Addresses.
d. Frames are forwarded. Learning addresses.

5. What securITy measures does cisco suggest in the access layer of their recommended campus archITecture?
a. Route filtering
b. cisco recommends no securITy measures in the access layer
c. Device securITy such as passwords
d. Port securITy

6. Telnet access directly to a swITch or router command uses what facilITy?
a. slip
b. server
c. async port
d. line

7. What mechanism can be used to prevent 憆ogue?HSRP routers from asserting high priorITIEs and becoming the active router?
a. MD5 authentication may be used in HSRP messages
b. Plain text authentication may be used in HSRP messages
c. The command 憇tandby (group_number) access-group (access_list)?is used to specify the routers that may participate in an HSRP group
d. Each HSRP router is explicitly configured wITh the address of the other routers in the group using the command 憇tandby (group_number) (group_member_address)

..............................