CiscoCCNP：BCMSN 2

ciscoCCNP：BCMSN 2
 

101. When the router with the highest priorITy is not the active router due to temporary unavailability, what command must be in the configuration to make it regain the role of active router when IT becomes available?
a. By default, the highest priorITy router will regain active status unless the 憇tandby (group_number) submIT?command was configured
b. The command 憇tandby (group_number) preempt?will make the highest priorITy router regain active status
c. Be default, the highest priorITy router will not regain active status and there are no commands to change this behavior
d. By default, the highest priorITy router will regain active status and there are not commands to change this behavior

102. What effect does the following access-list fragment have if applIEd to an interface tHRough which traffic to/from 192.168.10 must pass?
Access-list 1 deny 192.168.10.0 0.0.0.255
Access-list 1 permIT 192.168.10.5 0.0.0.0

a. Traffic to and from host 192.168.10.5 will be permITted and traffic to and from the rest of the subnet will be denIEd
b. The syntax is incorrect
c. Traffic to the whole subnet-including 192.168.10.5 will be denIEd
d. Traffic to the whole subnet-including 192.168.10.5-will be permITted

103. Fast ethernet is recommended for use in which parts of the cisco campus archITecture?
a. distribution layer


..............................