真空吸尘器耐压测试规范(doc 6页)
真空吸尘器耐压测试规范(doc 6页)内容简介
真空吸尘器耐压测试规范内容提要:
1.0 Purpose / 目的
To evaluate the performance of dielectric voltage-withstand of the sample
评估样机绝缘材料的绝缘耐压性能.
2.0 Definition/概念:
None 无.
3.0 Reference Documents/参考文献:
U.L.1017 CAN/CSA-C22.2 NO.243-01, dated 12-7-2001,CL 5.11
4.0 Equipment/设备:
Withstanding voltage tester(耐压测试仪).
5.0 General Instructions/说明:
5.1 Tests may be conducted at any ambient temperature within a range of 10-40℃ (50-100℉).
测试可在10~40℃(50~100℉)之内的环境温度下进行.
5.2 Unless otherwise noted, all tests are to be conducted with appliance connected to a 120VAC, 60Hz power source.
除非另外标注, 否则所有样板都将连接在120V/60Hz电源下进行测试.
5.3 All equipment used must be calibrated on an annual basis. Calibration stickers with last calibration and calibration due date must be affixed to each instrument.
使用的所有设备都必须以一年为周期进行调校.载有最后调校日期和调校周期的调校粘纸必须粘固在每一个仪表上.
..............................
1.0 Purpose / 目的
To evaluate the performance of dielectric voltage-withstand of the sample
评估样机绝缘材料的绝缘耐压性能.
2.0 Definition/概念:
None 无.
3.0 Reference Documents/参考文献:
U.L.1017 CAN/CSA-C22.2 NO.243-01, dated 12-7-2001,CL 5.11
4.0 Equipment/设备:
Withstanding voltage tester(耐压测试仪).
5.0 General Instructions/说明:
5.1 Tests may be conducted at any ambient temperature within a range of 10-40℃ (50-100℉).
测试可在10~40℃(50~100℉)之内的环境温度下进行.
5.2 Unless otherwise noted, all tests are to be conducted with appliance connected to a 120VAC, 60Hz power source.
除非另外标注, 否则所有样板都将连接在120V/60Hz电源下进行测试.
5.3 All equipment used must be calibrated on an annual basis. Calibration stickers with last calibration and calibration due date must be affixed to each instrument.
使用的所有设备都必须以一年为周期进行调校.载有最后调校日期和调校周期的调校粘纸必须粘固在每一个仪表上.
..............................
用户登陆
抽样检验热门资料
抽样检验相关下载