可充电型真空吸尘器充电输入输出测试(doc 3页)
可充电型真空吸尘器充电输入输出测试(doc 3页)内容简介
可充电型真空吸尘器充电输入输出测试内容提要:
1.0 Purpose / 目的
To measure the charging input/output of the charger when the sample is in recharging.
评估可充电型样机的充电器在充电过程中其输入输出是否符合安全要求.
2.0 Definition/概念:
2.1 Discharge-Operate the sample no longer to operate with the switch in the“on” position for an additional hour.
电池完全放电-运行样机直到其完全停止,再保持开关处在开的位置上多一个小时
2.2 Recharge-Charge the discharged sample for 16 hours through the charger connected to supply mains of 120V/60Hz.
充满电-让电池完全放电的样机通过充电器接上120V/60Hz电源充电16小时.
3.0 Reference Documents/参考文献:
ULS-01017-DMLW-DataSheet-2001 Form Issued: 1992-07-01 Form Revised: 2006-07-07
4.0 Equipment/设备:
4.1 Frequency converter. (变频电源)
4.2 Power analyzer(功率分析仪)
4.3 Datalogger&plug-type module(安捷伦Datalogger和通道插板)
4.4 J-type thermocouple wire. (J 型温度线)
4.5 Sicomet99 & Parsec Activator.
4.6 UL test carpet.( UL 地毯)
..............................
1.0 Purpose / 目的
To measure the charging input/output of the charger when the sample is in recharging.
评估可充电型样机的充电器在充电过程中其输入输出是否符合安全要求.
2.0 Definition/概念:
2.1 Discharge-Operate the sample no longer to operate with the switch in the“on” position for an additional hour.
电池完全放电-运行样机直到其完全停止,再保持开关处在开的位置上多一个小时
2.2 Recharge-Charge the discharged sample for 16 hours through the charger connected to supply mains of 120V/60Hz.
充满电-让电池完全放电的样机通过充电器接上120V/60Hz电源充电16小时.
3.0 Reference Documents/参考文献:
ULS-01017-DMLW-DataSheet-2001 Form Issued: 1992-07-01 Form Revised: 2006-07-07
4.0 Equipment/设备:
4.1 Frequency converter. (变频电源)
4.2 Power analyzer(功率分析仪)
4.3 Datalogger&plug-type module(安捷伦Datalogger和通道插板)
4.4 J-type thermocouple wire. (J 型温度线)
4.5 Sicomet99 & Parsec Activator.
4.6 UL test carpet.( UL 地毯)
..............................
用户登陆
抽样检验热门资料
抽样检验相关下载