PPAP—生产件批准程序(ppt 40页)

主要内容
生产件批准程序Production part approval process
PPAP—生产件批准程序PPAP-Production part approval process
适用性Applicability
第一部分   总则Section 1 General
第二部分 PPAP的过程要求Section 2 PPAP process requirements
2.2 PPAP要求2.2 PPAP requirements
2.2.1设计记录2.2.1 Design record
2.2.2 任何授权的工程变更文件2.2.2 Authorized engineering change documents
2.2.3 顾客工程批准2.2.3 Customer engineering approval
2.2.4  设计失效模式及后果分析，如果组织有设计职责2.2.4 Design failure mode and effects analysis, if the organization is product design-responsible
2.2.5 过程流程图2.2.5 Process flow diagram (s)
2.2.6 过程失效式及后果分析2.2.6 Process failure mode and effects analysis
2.2.7 控制计划2.2.7 Control plan
2.2.8测量系统分析研究2.2.8Measurement system analysis studies
2.2.9全尺寸测量结果2.2.9 Dimensional results
2.2.10 材料/性能试验结果的记录2.2.10 Records of Material/Performance Test Results
2.2.11初始过程研究2.2.11 Initial process studies
2.2.12 合格实验室的文件要求2.2.12 Qualified laboratory documentation
2.2.13外观批准报告（AAR)2.2.13 Appearance Approval Report
2.2.14生产件样品2.2.14 Sample production parts
2.2.15 标准样品2.2.15 Master sample
2.2.16检查辅具2.2.16 Checking aids 
2.2.17顾客的特殊要求2.2.17 Customer-specified requirements
2.2.18零件提交保证书2.2.18 Part submission Warrant
第3部分 顾客的通知和提交要求Section 3 Customer notification and Submission Requirements
3.2 提交要求3.2 Submission to Customer
第4部分 提交要求-证据的等级Section 4 Submission to customer –levels of evidence
第5部分 零件提交状态Section 5 Part submission status
5.2 顾客的PPAP状态5.2 Customer PPAP status
第6部分 记录的保存Section 6 Record retention

 

..............................